datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  ADM1485JRZ Datasheet

ADM1485JRZ

  

Datasheet PDF

Match, Like ADM1485JRZ
Start with ADM1485JRZ-*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
ADI
Analog Devices
ADM1485JRZ 5 V Low Power EIA RS-485 Transceiver

GENERAL DESCRIPTION
The ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both RS-485 and RS-422 EIA Standards. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are three-stated.
The ADM1485 operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if, during fault condi tions, a significant temperature increase is detected in the internal driver circuitry.
Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM1485 driver features high output impedance when disabled and also when powered down.
This minimizes the loading effect when the transceiver is not being used. The high impedance driver output is maintained over the entire common-mode voltage range from –7 V to +12 V.
The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
The ADM1485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up.
The ADM1485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at typical data rates of 30 Mbps while low skew minimizes EMI interference.
The part is fully specified over the commercial and industrial temperature range and is available in PDIP, SOIC, and small MSOP packages.

FEATURES
   Meets EIA RS-485 Standard
   30 Mbps Data Rate
   Single 5 V Supply
   –7 V to +12 V Bus Common-Mode Range
   High Speed, Low Power BiCMOS
   Thermal Shutdown Protection
   Short-Circuit Protection
   Driver Propagation Delay: 10 ns
   Receiver Propagation Delay: 15 ns
   High-Z Outputs with Power Off
   Superior Upgrade for LTC1485
  
APPLICATIONS
   Low Power RS-485 Systems
   DTE-DCE Interface
   Packet Switching
   Local Area Networks
   Data Concentration
   Data Multiplexers
   Integrated Services Digital Network (ISDN)


other parts : ADM1485  ADM1485JNZ  ADM1485JR-REEL  ADM1485JRZ-REEL  ADM1485ANZ  ADM1485ARMZ  ADM1485ARMZ-REEL  ADM1485ARMZ-REEL7  ADM1485ARZ  ADM1485ARZ-REEL  
ADM1485JRZ PDF
ADI
Analog Devices
ADM1485JRZ-REEL 5 V Low Power EIA RS-485 Transceiver

GENERAL DESCRIPTION
The ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both RS-485 and RS-422 EIA Standards. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are three-stated.
The ADM1485 operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if, during fault condi tions, a significant temperature increase is detected in the internal driver circuitry.
Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM1485 driver features high output impedance when disabled and also when powered down.
This minimizes the loading effect when the transceiver is not being used. The high impedance driver output is maintained over the entire common-mode voltage range from –7 V to +12 V.
The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
The ADM1485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up.
The ADM1485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at typical data rates of 30 Mbps while low skew minimizes EMI interference.
The part is fully specified over the commercial and industrial temperature range and is available in PDIP, SOIC, and small MSOP packages.

FEATURES
   Meets EIA RS-485 Standard
   30 Mbps Data Rate
   Single 5 V Supply
   –7 V to +12 V Bus Common-Mode Range
   High Speed, Low Power BiCMOS
   Thermal Shutdown Protection
   Short-Circuit Protection
   Driver Propagation Delay: 10 ns
   Receiver Propagation Delay: 15 ns
   High-Z Outputs with Power Off
   Superior Upgrade for LTC1485
  
APPLICATIONS
   Low Power RS-485 Systems
   DTE-DCE Interface
   Packet Switching
   Local Area Networks
   Data Concentration
   Data Multiplexers
   Integrated Services Digital Network (ISDN)


other parts : ADM1485  ADM1485JNZ  ADM1485JRZ  ADM1485JR-REEL  ADM1485ANZ  ADM1485ARMZ  ADM1485ARMZ-REEL  ADM1485ARMZ-REEL7  ADM1485ARZ  ADM1485ARZ-REEL  
ADM1485JRZ-REEL PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  AFBR-5803ATZ  HDSP-F151  HDSP-3350  HCF4555B_01  G121SN01V2  G121SN01  APE1117A_09  APE1117A  APE1117_09  APE1117  AP2301GN  AP2301GN-HF_14  AP2301GN  AP2301N-HF  SSM60T03J  60T03GH-HF  APL5523_09  APL5536  MBR2060CT  APM2054NVC-TR  APM2054NUC-TR  APM2054NDC-TR  ACMD-7411  SSL4120T/1,518  60T03GH  60T03GH  PM50502C  4N35  G121SN01V3  G121SN01V4  SMA1212  NM27C256  MRF175GV  MRF175GV  LS10R2  LS10K1-T  ILP03N60  HDSP-3358  HCPL-4506  HCF4555  APW7142  APM2054N  AP2301GN-HF  ADSP-2186MBST-266  AD7324  ACPL-C79A-000E  ACPL-C78A  HDSP-F201  APE1117-HF-3  M170EU01-V0  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]